K系列

K系列

电动线性执行器

  • 最大力高达3,500磅力(15千牛)
  • 速度高达32.8英寸/秒(833毫米/秒)
  • 行程为0.7到60英寸(20到1525毫米)
  • 针对杆式传动的通用解决方案
Find a Distributor

通用设计以实现最大的灵活性

Exlar的K系列执行器为众多杆式执行器应用提供了真正通用的解决方案。 现在提供60,75和90 mm框架尺寸。

 

很高的性能与很小的形状因数

这些坚固的电动执行器提供了一种理想的气动缸替代品,并且具有同等尺寸的特点以及类似的形状因数。可选的滚柱丝杠驱动装置是液压缸的一种优秀替代品。更好的性能、更大的灵活性及更长的寿命达到顶点,使得K系列成为很多应用的一种明智选择。

 

多种型号可正好符合您的需要

KX系列执行器有三种框架尺寸,因此您可以选择最适合您应用要求的选件:

 

KX执行器

KX等级中的高性能行星式滚柱丝杠可提供远优于竞争对手执行器技术的性能。这些执行器适用于工业自动化、移动设备、流程控制及很多其他要求高的应用。

 

KM执行器 – 传统产品

KX等级中的标准容量和较低成本的行星式滚柱丝杠并不适用于成本的优先权高于长寿命的应用。然而,这些执行器可提供双倍于类似尺寸滚珠丝杠执行器的寿命,还可提供高效率和更大的耐冲击性。

 

其他优点

  • 灵活的设计适合于各种应用和配置
  • 与DC,步进电动机和伺服电动机兼容的通用安装选项
  • 预先配置的平行和同轴电动机支架可用于多数电动机
  • 多种型号可实现最大的灵活性
  • 具有密封体选项的阳极氧化铝外壳可用于恶劣环境
  • 专用材料和涂层选项
  • 针对长寿命和低维护建造

 

快速数据

型号: KX60, KX75, KX90(高容量滚柱丝杠执行器)
KM60, KM75, KM90(标准容量滚柱丝杠执行器)- 传统产品
框架尺寸: 2.3, 2.9, 3.5英寸(60, 75, 90毫米)
行程长度: 150, 300, 600, 900 毫米 (6, 12, 24, 36 英寸 )
线性速度: 高达32.8英寸/秒(833毫米/秒)
最大力: 高达3,500磅力(15千牛)

相关产业

配置选项

K系列配置选项

Actuator Class
KX = high capacity roller screw
KM = standard capacity roller screw – Legacy Product

AA = Frame Size
BBBB = Stroke Length
CC = Screw Lead (linear travel screw revolution)
= Mounting
E = Rod End Thread / Rod Material
FFF = Input Drive Provisions
GGG = Motor Mount Provisions

机械选件

L1,L2,L3 =可调外部行程开关

外部行程开关指示到控制器的行程,并且可以在原始位置或最终位置进行调节。

*某些选项不适用于每个配置。 对于以上未列出的选项或特殊功能或扩展温度操作, Exlar Applications Engineering.

Exlar执行器的IP等级

K系列

K60
性能规格
 Printable View

K60 Mechanical Specifications

MODELS   KX | KM - LEGACY PRODUCT
Screw Lead in 0.1969 0.3937 | 0.1969 0.3937
  mm 5 10 | 5 10
Maximum Force^2 lbf 1350 675 | 1350 675
  kN 6 3 | 6 3
Life at Maximum Force in x 10^6 1.6 18.2 | 0.4 4.5
  km 41.7 461.4 | 10.4 115.3
C_a (Dynamic Load Rating) lbf 2738 2421 | 1725 1525
  kN 12.2 10.8 | 7.7 6.8
Maximum Input Torque^1 lbf-in 53 53 | 53 53
  Nm 6 6 | 6 6
Max Rated RPM @ Input Shaft RPM 5000 5000 | 5000 5000
Maximum Linear Speed @ 
Maximum Rated RPM
in/sec 16.4 32.8 | 16.4 32.8
  mm/sec 417 833 | 417 833

1 - Input torque should be limited such that Max Force is not exceeded. For a parallel belt ratio, the input torque ratings must be divided by the belt ratio for allowable motor torque. The output force ratings remain the same.
2 - Maximum allowable actuator–generated force that can be applied routinely. Exceeding this force may result in permanent damage to the actuator. For maximum allowable externally-applied axial forces, consult factory. For high force, short stroke applications, consult factory.

 

K60 Intertias

  KG-M^-2 (LBF-IN-SEC^-2) KG-M^-2 (LBF-IN-SEC^-2)
  5 mm Lead Add per 25 mm, 5 mm Lead
Base Unit - Input Drive Shaft Only 1.480 x 10^-5 (1.31 x 10^-4) 1.022 x 10^-6 (9.045 x 10^-6)
Inline Unit - w/Motor Coupling 2.702 x 10^-5 (2.39 x 10^-4) 1.022 x 10^-6 (9.045 x 10^-6)
  10 mm Lead Add per 25 mm, 10 mm Lead
Base Unit - Input Drive Shaft Only 1.616 x 10^-5 (1.43 x 10^-4) 1.173 x 10^-6 (1.038 x 10^-5)
Inline Unit - w/Motor Coupling 2.837 x 10^-5 (2.51 x 10^-4) 1.173 x 10^-6 (1.038 x 10^-5)
Parallel Drive Inertias (P10 Option)
  5 mm Lead Add per 25 mm, 5 mm Lead
1:1 Reduction Parallel Belt Drive (66 mm) 4.339 x 10^-5 (3.84 x 10^-4) 1.022 x 10^-6 (9.045 x 10^-6)
1:1 Reduction Parallel Belt Drive (86 mm) 7.378 x 10^-5 (6.53 x 10^-4) 1.022 x 10^-6 (9.045 x 10^-6)
1:1 Reduction Parallel Belt Drive (96 mm) 8.564 x 10^-5 (7.58 x 10^-4) 1.022 x 10^-6 (9.045 x 10^-6)
2:1 Reduction Parallel Belt Drive (96 mm) 7.095 x 10^-5 (6.28 x 10^-4) 2.555 x 10^-7 (2.261 x 1^-6)
  10 mm Lead Add per 25 mm, 10 mm Lead
1:1 Reduction Parallel Belt Drive (66 mm) 4.474 x 10^-5 (3.96 x 10^-4) 1.173 x 10^-6 (1.038 x 10^-5)
1:1 Reduction Parallel Belt Drive (86 mm) 7.514 x 10^-5 (6.65 x 10^-4) 1.173 x 10^-6 (1.038 x 10^-5)
1:1 Reduction Parallel Belt Drive (96 mm) 8.704 x 10^-5 (7.70 x 10^-4) 1.173 x 10^-6 (1.038 x 10^-5)
2:1 Reduction Parallel Belt Drive (96 mm) 1.966 x 10^-5 (1.74 x 10^-4) 2.931 x 10^-7 (2.595 x 10^-6)
Parallel Drive Inertias (Smooth Motor Shaft Option)
  5 mm Lead Add per 25 mm, 5 mm Lead
1:1 Reduction Parallel Belt Drive (66 mm) 6.015 x 10^-5 (5.32 x 10^-4) 1.022 x 10^-6 (9.045 x 10^-6)
1:1 Reduction Parallel Belt Drive (86 mm) 1.103 x 10^-4 (9.76 x 10^-4) 1.022 x 10^-6 (9.045 x 10^-6)
1:1 Reduction Parallel Belt Drive (96 mm) 2.176 x 10^-4 (1.93 x 10^-3) 1.022 x 10^-6 (9.045 x 10^-6)
2:1 Reduction Parallel Belt Drive (96 mm) 8.768 x 10^-5 (7.76 x 10^-4) 2.555 x 10^-7 (2.261 x 10^-6)
  10 mm Lead Add per 25 mm, 10 mm Lead
1:1 Reduction Parallel Belt Drive (66 mm) 6.150 x 10^-5 (5.44 x 10^-4) 1.173 x 10^-6 (1.038 x 10^-6)
1:1 Reduction Parallel Belt Drive (86 mm) 1.117 x 10^-4 (9.88 x 10^-4) 1.173 x 10^-6 (1.038 x 10^-6)
1:1 Reduction Parallel Belt Drive (96 mm) 2.190 x 10^-4 (1.94 x 10^-3) 1.173 x 10^-6 (1.038 x 10^-6)
2:1 Reduction Parallel Belt Drive (96 mm) 8.802 x 10^-5 (7.79 x 10^-4) 2.931 x 10^-7 (2.595 x 10^-6)

 

K60 Weights

  LB KG
Base Actuator Weight (Zero Stroke) 3.7 1.7
Actuator Weight Adder (Per mm of Stroke) 0.017 0.008
Adder for Inline (excluding motor) 0.93 0.42
Adder for Parallel Drive (excluding motor) 1.6 0.73
Adder for Front Flange 0.93 0.42
Adder for Rear Flange 4.79 2.16
Adder for Rear Clevis 0.98 0.44
Adder for Rear Eye 0.67 0.30
Adder for Front/Rear Angle Mounts 0.54 0.24
Adder for Two Trunnions 0.72 0.33
Adder for Two Foot Mounts 1 0.45
数据曲线
 Printable View

K60 Critical Speed

 

Actuator Rated Speed (speed at which we have tested and rated the actuator)
* With longer stroke length actuators, the rated speed of the actuator is determined by the critical speed

 

 


 

K60 Maximum Radial

 


K60 Rated Force

 

 

估计寿命曲线
订购指南
 Printable View

要从Exlar订购产品,需要一个唯一的模型掩码(标识号)。 模型掩码是一个字符串,用于标识模型,大小和配置替代。

 

 

产品选型指南

为了方便您的订购过程,请在与您所在地区的销售代表联系之前,随时打印并填写本 Exlar应用工作表

执行器系列

KX = High Capacity Roller Screw

AA =执行器框架尺寸

60 = 60 mm (2.375 inches)
75 = 75 mm (2.95 inches)
90 = 90 mm (3.54 inches)

BBBB =行程长度(毫米)

0150 = 150 mm
0300 = 300 mm
0600 = 600 mm
0900 = 900 mm

CC =铅

Linear motion per screw revolution

05 = 5 mm (0.2 inch)
10 = 10 mm (0.4 inch)

D =安装选项

N = None, Base Unit

E =杆端选项

M = Male US standard thread
A = Male metric
F = Female US standard thread
B = Female Metric thread

FFF =输入驱动器配置

NMT = Drive Shaft Only, No Motor Mount
ISC = Inline, includes shaft coupling

Keyed Motor Shaft Options
P10 = Parallel, 1:1 Belt Reduction, Keyed Motor Shaft
P20 = Parallel, 2:1 Belt Reduction, Keyed Motor Shaft

Smooth Motor Shaft Options
S10 = Parallel, 1:1 Belt Reduction, Non-Keyed Motor Shaft
S20 = Parallel, 2:1 Belt Reduction, Non-Keyed Motor Shaft

GGG =马达安装规定

K60 Motor Mount Codes

BOLT CIRCLE DIAMETER (MM) PILOT DIAMETER (MM) SHAFT DIAMETER (MM) SHAFT LENGTH (MM) KEY WIDTH (MM) MOTOR MOUNT CODE
63 45 14 38 5 GEB
63 50a 12 36 4 GEA
68 60 12 30 4 GFB
68 60 16 48 5 GFA
70 50 14 30 5 JGA
70 50 16 30 5 GGB
70 50 16 37 5 GGA
75 60 14 30 5 IHB
90 60 19 40 6 JKF
90 70 14 30 5 JKD
90 70 16 35 NA JKC
90 70 16 40 5 JKG
90 70 19 40 6 JKA
95 50 14 30 5 ILA
95 65 14 30 5 ILA
100 80 10 32 3 IMD
100 80 14 30 5 IMA
100 80 14 40 5 JMC
100 80 16 40 5 IMB
100 80 19 40 6 IMC

 

K75 Motor Mount Codes

BOLT CIRCLE DIAMETER (MM) PILOT DIAMETER (MM) SHAFT DIAMETER (MM) SHAFT LENGTH (MM) KEY WIDTH (MM) MOTOR MOUNT CODE
68 60 16 48 5 GFA
70 50 16 40 5 GGA
75 60 16 48 5 GHA
85 70 22 56 6 GIA
90 60 19 40 6 JKF
90 70 16 40 5 JKG
90 70 19 40 6 JKA
100 80 14 40 5 JMC
100 80 16 40 5 IMB
100 80 19 40 6 IMC
100 80 19 55 6 JMD
100 80 22 48 6 GMA
115 95 19 40 6 INA
115 95 19 55 6 JNC
115 95 22 45 8 JND
115 95 22 70 NA JNB
115 95 24 45 8 JNA
115 95 24 50 8 INB
130 95 19 40 6 IPC
130 95 24 50 8 IPD
130 110 19 40 6 IPA
130 110 24 50 8 IPB
145 110 19 40 6 JQJ
145 110 19 55 5 JQG
145 110 19 55 6 JQK
145 110 22 55 8 JQH
145 110 22 55 6 JQF
145 110 22 70 8 JQE

 

K90 Motor Mount Codes

BOLT CIRCLE DIAMETER (MM) PILOT DIAMETER (MM) SHAFT DIAMETER (MM) SHAFT LENGTH (MM) KEY WIDTH (MM) MOTOR MOUNT CODE
70 50 16 40 5 GGA
75 60 16 48 5 GHA
85 70 22 56 6 GIA
90 60 19 40 6 JKF
90 70 16 40 5 JKG
90 70 19 40 6 JKA
100 80 14 40 5 JMC
100 80 16 40 5 IMB
100 80 19 40 6 IMC
100 80 19 55 6 JMD
100 80 20 40 6 GMB
100 80 22 48 6 GMA
115 95 19 40 6 INA
115 95 19 55 6 JNC
115 95 22 45 8 JND
115 95 22 70 NA JNB
115 95 24 45 8 JNA
115 95 24 50 8 INB
130 95 19 40 6 IPC
130 95 24 50 8 IPD
130 110 19 40 6 IPA
130 110 24 50 8 IPB
145 110 19 40 6 JQJ
145 110 19 55 5 JQG
145 110 19 55 6 JQK
145 110 22 55 8 JQH
145 110 22 55 6 JQF
145 110 22 70 8 JQE
145 110 24 55 8 JQD
MM =机械选件

L1 = One N.O., PNP
L2 = Two N.C., PNP
L3 = One N.O. PNP & two N.C., PNP
L4 = One N.O., NPN
L5 = Two N.C., NPN
L6 = One N.O., NPN & two N.C., NPN

For extended temperature operation consult factory for model number.

K75
性能规格
 Printable View

K75 Mechanical Specifications

MODELS   KX | KM - LEGACY PRODUCT
Screw Lead in 0.1969 0.3937 | 0.1969 0.3937
  mm 5 10 | 5 10
Maximum Force^2 lbf 2500 1250 | 2500 1250
  kN 11.1 5.6 | 11.1 5.6
Life at Maximum Force in x 10^6 2.4 22.6 | 0.6 5.6
  km 60.7 573.3 | 15.2 143.5
C_a (Dynamic Load Rating) lbf 5746 4820 | 3620 3036
  kN 25.6 21.4 | 16.1 13.5
Maximum Input Torque^1 lbf-in 98 98 | 98 98
  Nm 11 11 | 11 11
Max Rated RPM @ Input Shaft RPM 4000 4000 | 4000 4000
Maximum Linear Speed @ 
Maximum Rated RPM
in/sec 13.1 26.2 | 13.1 26.2
  mm/sec 333 666 | 333 666

1 - Input torque should be limited such that Max Force is not exceeded. For a parallel belt ratio, the input torque ratings must be divided by the belt ratio for allowable motor torque. The output force ratings remain the same.
2 - Maximum allowable actuator–generated force that can be applied routinely. Exceeding this force may result in permanent damage to the actuator. For maximum allowable externally-applied axial forces, consult factory. For high force, short stroke applications, consult factory.

 

K75 Inertias

  KG-M^-2 (LBF-IN-SEC^-2) KG-M^-2 (LBF-IN-SEC^-2)
  5 mm Lead Add per 25 mm, 5 mm Lead
Base Unit - Input Drive Shaft Only 9.26 x 10^-5 (8.20 x 10^-4) 3.13 x 10^-6 (2.77 x 10^-5)
Inline Unit - w/Motor Coupling 1.25 x 10^-4 (1.11 x 10^-3) 3.13 x 10^-6 (2.77 x 10^-5)
  10 mm Lead Add per 25 mm, 10 mm Lead
Base Unit - Input Drive Shaft Only 9.48 x 10^-5 (8.39 x 10^-4) 3.32 x 10^-6 (2.94 x 10^-5)
Inline Unit - w/Motor Coupling 1.44 x 10^-4 (1.28 x 10^-3) 3.32 x 10^-6 (2.94 x 10^-5)
Parallel Drive Inertias (P10 Option)
  5 mm Lead Add per 25 mm, 5 mm Lead
1:1 Reduction Parallel Belt Drive (86 mm) 2.29 x 10^-4 (2.03 x 10^-3) 3.13 x 10^-6 (2.77 x 10^-5)
1:1 Reduction Parallel Belt Drive (96 mm) 3.19 x 10^-4 (2.82 x 10^-3) 3.13 x 10^-6 (2.77 x 10^-5)
1:1 Reduction Parallel Belt Drive (130 mm) 5.96 x 10^-4 (5.28 x 10^-3) 3.13 x 10^-6 (2.77 x 10^-5)
2:1 Reduction Parallel Belt Drive (130 mm) 2.82 x 10^-4 (2.50 x 10^-3) 7.83 x 10^-7 (6.93 x 10^-6)
  10 mm Lead Add per 25 mm, 10 mm Lead
1:1 Reduction Parallel Belt Drive (86 mm) 2.31 x 10^-4 (2.05 x 10^-3) 3.32 x 10^-6 (2.94 x 10^-5)
1:1 Reduction Parallel Belt Drive (96 mm) 3.21 x 10^-4 (2.84 x 10^-3) 3.32 x 10^-6 (2.94 x 10^-5)
1:1 Reduction Parallel Belt Drive (130 mm) 5.98 x 10^-4 (5.30 x 10^-3) 3.32 x 10^-6 (2.94 x 10^-5)
2:1 Reduction Parallel Belt Drive (130 mm) 2.83 x 10^-4 (2.51 x 10^-3) 8.30 x 10^-7 (7.36 x 10^-6)
Parallel Drive Inertias (Smooth Motor Shaft Option)
  5 mm Lead Add per 25 mm, 5 mm Lead
1:1 Reduction Parallel Belt Drive (86 mm) 2.84 x 10^-4 (2.51 x 10^-3) 3.13 x 10^-6 (2.77 x 10^-5)
1:1 Reduction Parallel Belt Drive (96 mm) 4.25 x 10^-4 (3.76 x 10^-3) 3.13 x 10^-6 (2.77 x 10^-5)
1:1 Reduction Parallel Belt Drive (130 mm) 7.33 x 10^-4 (6.48 x 10^-3) 3.13 x 10^-6 (2.77 x 10^-5)
2:1 Reduction Parallel Belt Drive (130 mm) 3.32 x 10^-4 (2.94 x 10^-3) 7.83 x 10^-7 (6.93 x 10^-6)
  10 mm Lead Add per 25 mm, 10 mm Lead
1:1 Reduction Parallel Belt Drive (86 mm) 2.86 x 10^-4 (2.53 x 10^-3) 3.32 x 10^-6 (2.94 x 10^-5)
1:1 Reduction Parallel Belt Drive (96 mm) 4.27 x 10^-4 (3.78 x 10^-3) 3.32 x 10^-6 (2.94 x 10^-5)
1:1 Reduction Parallel Belt Drive (130 mm) 7.35 x 10^-4 (6.50 x 10^-3) 3.32 x 10^-6 (2.94 x 10^-5)
2:1 Reduction Parallel Belt Drive (130 mm) 3.33 x 10^-4 (2.94 x 10^-3) 8.30 x 10^-7 (7.35 x 10^-6)

 

K75 Weights

  LB KG
Base Actuator Weight (Zero Stroke) 6.75 3.06
Actuator Weight Adder (Per mm of Stroke) 0.0235 0.0107
Adder for Inline (excluding motor) 2.46 1.12
Adder for Parallel Drive (excluding motor) 4.06 1.84
Adder for Front Flange 1.91 0.87
Adder for Rear Flange 2.49 1.13
Adder for Rear Clevis 1.85 0.84
Adder for Rear Eye 1.85 0.84
Adder for Front/Rear Angle Mounts 1.37 0.62
Adder for Two Trunnions 1.56 0.71
Adder for Two Foot Mounts 2.47 1.12
数据曲线
 Printable View

K75 Critical Speed

 

Actuator Rated Speed (speed at which we have tested and rated the actuator)
* With longer stroke length actuators, the rated speed of the actuator is determined by the critical speed

 


K75 Maximum Radial

 


K75 Rated Force

 

 

估计寿命曲线
订购指南
 Printable View

要从Exlar订购产品,需要一个唯一的模型掩码(标识号)。 模型掩码是一个字符串,用于标识模型,大小和配置替代。

 

 

产品选型指南

为了方便您的订购过程,请在与您所在地区的销售代表联系之前,随时打印并填写本 Exlar应用工作表

执行器系列

KX = High Capacity Roller Screw

AA =执行器框架尺寸

60 = 60 mm (2.375 inches)
75 = 75 mm (2.95 inches)
90 = 90 mm (3.54 inches)

BBBB =行程长度(毫米)

0150 = 150 mm
0300 = 300 mm
0600 = 600 mm
0900 = 900 mm

CC =铅

Linear motion per screw revolution

05 = 5 mm (0.2 inch)
10 = 10 mm (0.4 inch)

D =安装选项

N = None, Base Unit

E =杆端选项

M = Male US standard thread
A = Male metric
F = Female US standard thread
B = Female Metric thread

FFF =输入驱动器配置

NMT = Drive Shaft Only, No Motor Mount
ISC = Inline, includes shaft coupling

Keyed Motor Shaft Options
P10 = Parallel, 1:1 Belt Reduction, Keyed Motor Shaft
P20 = Parallel, 2:1 Belt Reduction, Keyed Motor Shaft

Smooth Motor Shaft Options
S10 = Parallel, 1:1 Belt Reduction, Non-Keyed Motor Shaft
S20 = Parallel, 2:1 Belt Reduction, Non-Keyed Motor Shaft

GGG =马达安装规定

K60 Motor Mount Codes

BOLT CIRCLE DIAMETER (MM) PILOT DIAMETER (MM) SHAFT DIAMETER (MM) SHAFT LENGTH (MM) KEY WIDTH (MM) MOTOR MOUNT CODE
63 45 14 38 5 GEB
63 50a 12 36 4 GEA
68 60 12 30 4 GFB
68 60 16 48 5 GFA
70 50 14 30 5 JGA
70 50 16 30 5 GGB
70 50 16 37 5 GGA
75 60 14 30 5 IHB
90 60 19 40 6 JKF
90 70 14 30 5 JKD
90 70 16 35 NA JKC
90 70 16 40 5 JKG
90 70 19 40 6 JKA
95 50 14 30 5 ILA
95 65 14 30 5 ILA
100 80 10 32 3 IMD
100 80 14 30 5 IMA
100 80 14 40 5 JMC
100 80 16 40 5 IMB
100 80 19 40 6 IMC

 

K75 Motor Mount Codes

BOLT CIRCLE DIAMETER (MM) PILOT DIAMETER (MM) SHAFT DIAMETER (MM) SHAFT LENGTH (MM) KEY WIDTH (MM) MOTOR MOUNT CODE
68 60 16 48 5 GFA
70 50 16 40 5 GGA
75 60 16 48 5 GHA
85 70 22 56 6 GIA
90 60 19 40 6 JKF
90 70 16 40 5 JKG
90 70 19 40 6 JKA
100 80 14 40 5 JMC
100 80 16 40 5 IMB
100 80 19 40 6 IMC
100 80 19 55 6 JMD
100 80 22 48 6 GMA
115 95 19 40 6 INA
115 95 19 55 6 JNC
115 95 22 45 8 JND
115 95 22 70 NA JNB
115 95 24 45 8 JNA
115 95 24 50 8 INB
130 95 19 40 6 IPC
130 95 24 50 8 IPD
130 110 19 40 6 IPA
130 110 24 50 8 IPB
145 110 19 40 6 JQJ
145 110 19 55 5 JQG
145 110 19 55 6 JQK
145 110 22 55 8 JQH
145 110 22 55 6 JQF
145 110 22 70 8 JQE

 

K90 Motor Mount Codes

BOLT CIRCLE DIAMETER (MM) PILOT DIAMETER (MM) SHAFT DIAMETER (MM) SHAFT LENGTH (MM) KEY WIDTH (MM) MOTOR MOUNT CODE
70 50 16 40 5 GGA
75 60 16 48 5 GHA
85 70 22 56 6 GIA
90 60 19 40 6 JKF
90 70 16 40 5 JKG
90 70 19 40 6 JKA
100 80 14 40 5 JMC
100 80 16 40 5 IMB
100 80 19 40 6 IMC
100 80 19 55 6 JMD
100 80 20 40 6 GMB
100 80 22 48 6 GMA
115 95 19 40 6 INA
115 95 19 55 6 JNC
115 95 22 45 8 JND
115 95 22 70 NA JNB
115 95 24 45 8 JNA
115 95 24 50 8 INB
130 95 19 40 6 IPC
130 95 24 50 8 IPD
130 110 19 40 6 IPA
130 110 24 50 8 IPB
145 110 19 40 6 JQJ
145 110 19 55 5 JQG
145 110 19 55 6 JQK
145 110 22 55 8 JQH
145 110 22 55 6 JQF
145 110 22 70 8 JQE
145 110 24 55 8 JQD
MM =机械选件

L1 = One N.O., PNP
L2 = Two N.C., PNP
L3 = One N.O. PNP & two N.C., PNP
L4 = One N.O., NPN
L5 = Two N.C., NPN
L6 = One N.O., NPN & two N.C., NPN

For extended temperature operation consult factory for model number.

K90
性能规格
 Printable View

K90 Mechanical Specifications

MODELS   KX | KM - LEGACY PRODUCT
Screw Lead in 0.1969 0.3937 | 0.1969 0.3937
  mm 5 10 | 5 10
Maximum Force^2 lbf 3500 1750 | 3500 1750
  kN 15.6 7.8 | 15.6 7.8
Life at Maximum Force in x 10^6 7.1 90.4 | 1.8 22.6
  km 179.6 2295 | 44.9 573.8
C_a (Dynamic Load Rating) lbf 11548 10715 | 7275 6750
  kN 51.4 47.7 | 32.4 30
Maximum Input Torque^1 lbf-in 137 137 | 137 137
  Nm 16 16 | 16 16
Max Rated RPM @ Input Shaft RPM 3000 3000 | 3000 3000
Maximum Linear Speed @ 
Maximum Rated RPM
in/sec 9.8 19.7 | 9.8 19.7
  mm/sec 250 500 | 250 500

1 - Input torque should be limited such that Max Force is not exceeded. For a parallel belt ratio, the input torque ratings must be divided by the belt ratio for allowable motor torque. The output force ratings remain the same.
2 - Maximum allowable actuator–generated force that can be applied routinely. Exceeding this force may result in permanent damage to the actuator. For maximum allowable externally-applied axial forces, consult factory. For high force, short stroke applications, consult factory.

 

K90 Inertias

  KG-M^-2 (LBF-IN-SEC^-2) KG-M^-2 (LBF-IN-SEC^-2)
  5 mm Lead Add per 25 mm, 5 mm Lead
Base Unit - Input Drive Shaft Only 2.97 x 10^-4 (2.63 x 10^-3) 1.11 x 10^-5 (9.80 x 10^-5)
Inline Unit - w/Motor Coupling 3.84 x 10^-4 (3.40 x 10^-3) 1.11 x 10^-5 (9.80 x 10^-5)
  10 mm Lead Add per 25 mm, 10 mm Lead
Base Unit - Input Drive Shaft Only 3.00 x 10^-4 (2.66 x 10^-3) 1.13 x 10^-5 (1.00 x 10^-4)
Inline Unit - w/Motor Coupling 3.87 x 10^-4 (3.43 x 10^-3) 1.13 x 10^-5 (1.00 x 10^-4)
Parallel Drive Inertias (P10 Option)
  5 mm Lead Add per 25 mm, 5 mm Lead
1:1 Reduction Parallel Belt Drive (96 mm) 5.12 x 10^-4 (4.53 x 10^-3) 1.11 x 10^-5 (9.80 x 10^-5)
1:1 Reduction Parallel Belt Drive (130 mm) 7.98 x 10^-4 (7.07 x 10^-3) 1.11 x 10^-5 (9.80 x 10^-5)
2:1 Reduction Parallel Belt Drive (130 mm) 3.41 x 10^-4 (3.02 x 10^-3) 2.77 x 10^-6 (2.45 x 10^-5)
  10 mm Lead Add per 25 mm, 10 mm Lead
1:1 Reduction Parallel Belt Drive (96 mm) 5.15 x 10^-4 (4.56 x 10^-3) 1.13 x 10^-5 (1.00 x 10^-4)
1:1 Reduction Parallel Belt Drive (130 mm) 8.02 x 10^-4 (7.10 x 10^-3) 1.13 x 10^-5 (1.00 x 10^-4)
2:1 Reduction Parallel Belt Drive (130 mm) 3.42 x 10^-4 (3.03 x 10^-3) 2.82 x 10^-6 (2.50 x 10^-5)
Parallel Drive Inertias (Smooth Motor Shaft Option)
  5 mm Lead Add per 25 mm, 5 mm Lead
1:1 Reduction Parallel Belt Drive (96 mm) 6.18 x 10^-4 (5.47 x 10^-3) 1.11 x 10^-5 (9.80 x 10^-5)
1:1 Reduction Parallel Belt Drive (130 mm) 9.35 x 10^-4 (8.27 x 10^-3) 1.11 x 10^-5 (9.80 x 10^-5)
2:1 Reduction Parallel Belt Drive (130 mm) 3.91 x 10^-4 (3.46 x 10^-3) 2.77 x 10^-6 (2.45 x 10^-5)
  10 mm Lead Add per 25 mm, 10 mm Lead
1:1 Reduction Parallel Belt Drive (96 mm) 6.21 x 10^-4 (5.50 x 10^-3) 1.13 x 10^-5 (1.00 x 10^-4)
1:1 Reduction Parallel Belt Drive (130 mm) 9.38 x 10^-4 (8.30 x 10^-3) 1.13 x 10^-5 (1.00 x 10^-4)
2:1 Reduction Parallel Belt Drive (130 mm) 3.92 x 10^-4 (3.47 x 10^-3) 2.82 x 10^-6 (2.50 x 10^-5)

 

K90 Weights

  LB KG
Base Actuator Weight (Zero Stroke) 11.96 5.42
Actuator Weight Adder (Per mm of Stroke) 0.0366 0.016
Adder for Inline (excluding motor) 3.35 1.51
Adder for Parallel Drive (excluding motor) 5.8 2.62
Adder for Front Flange 3.4 1.54
Adder for Rear Flange 6.31 2.86
Adder for Rear Clevis 3.21 1.45
Adder for Rear Eye 2.49 1.13
Adder for Front/Rear Angle Mounts 1.97 0.9
Adder for Two Trunnions 1.768 0.8
Adder for Two Foot Mounts 3.78 1.71
数据曲线
 Printable View

 

K90 Critical Speed

Actuator Rated Speed (speed at which we have tested and rated the actuator)
* With longer stroke length actuators, the rated speed of the actuator is determined by the critical speed

 


K90 Maxium Radial


K90 Rated Force

估计寿命曲线
订购指南
 Printable View

要从Exlar订购产品,需要一个唯一的模型掩码(标识号)。 模型掩码是一个字符串,用于标识模型,大小和配置替代。

 

 

产品选型指南

为了方便您的订购过程,请在与您所在地区的销售代表联系之前,随时打印并填写本 Exlar应用工作表

执行器系列

KX = High Capacity Roller Screw

AA =执行器框架尺寸

60 = 60 mm (2.375 inches)
75 = 75 mm (2.95 inches)
90 = 90 mm (3.54 inches)

BBBB =行程长度(毫米)

0150 = 150 mm
0300 = 300 mm
0600 = 600 mm
0900 = 900 mm

CC =铅

Linear motion per screw revolution

05 = 5 mm (0.2 inch)
10 = 10 mm (0.4 inch)

D =安装选项

N = None, Base Unit

E =杆端选项

M = Male US standard thread
A = Male metric
F = Female US standard thread
B = Female Metric thread

FFF =输入驱动器配置

NMT = Drive Shaft Only, No Motor Mount
ISC = Inline, includes shaft coupling

Keyed Motor Shaft Options
P10 = Parallel, 1:1 Belt Reduction, Keyed Motor Shaft
P20 = Parallel, 2:1 Belt Reduction, Keyed Motor Shaft

Smooth Motor Shaft Options
S10 = Parallel, 1:1 Belt Reduction, Non-Keyed Motor Shaft
S20 = Parallel, 2:1 Belt Reduction, Non-Keyed Motor Shaft

GGG =马达安装规定

K60 Motor Mount Codes

Bolt Circle Diameter (mm) Pilot Diameter (mm) Shaft Diameter (mm) Shaft Length (mm) Key Width (mm) Motor Mount Code
63 45 14 38 5 GEB
63 50a 12 36 4 GEA
68 60 12 30 4 GFB
68 60 16 48 5 GFA
70 50 14 30 5 JGA
70 50 16 30 5 GGB
70 50 16 37 5 GGA
75 60 14 30 5 IHB
90 60 19 40 6 JKF
90 70 14 30 5 JKD
90 70 16 35 NA JKC
90 70 16 40 5 JKG
90 70 19 40 6 JKA
95 50 14 30 5 ILA
95 65 14 30 5 ILA
100 80 10 32 3 IMD
100 80 14 30 5 IMA
100 80 14 40 5 JMC
100 80 16 40 5 IMB
100 80 19 40 6 IMC

 

K75 Motor Mount Codes

Bolt Circle Diameter (mm) Pilot Diameter (mm) Shaft Diameter (mm) Shaft Length (mm) Key Width (mm) Motor Mount Code
68 60 16 48 5 GFA
70 50 16 40 5 GGA
75 60 16 48 5 GHA
85 70 22 56 6 GIA
90 60 19 40 6 JKF
90 70 16 40 5 JKG
90 70 19 40 6 JKA
100 80 14 40 5 JMC
100 80 16 40 5 IMB
100 80 19 40 6 IMC
100 80 19 55 6 JMD
100 80 22 48 6 GMA
115 95 19 40 6 INA
115 95 19 55 6 JNC
115 95 22 45 8 JND
115 95 22 70 NA JNB
115 95 24 45 8 JNA
115 95 24 50 8 INB
130 95 19 40 6 IPC
130 95 24 50 8 IPD
130 110 19 40 6 IPA
130 110 24 50 8 IPB
145 110 19 40 6 JQJ
145 110 19 55 5 JQG
145 110 19 55 6 JQK
145 110 22 55 8 JQH
145 110 22 55 6 JQF
145 110 22 70 8 JQE

 

K90 Motor Mount Codes

Bolt Circle Diameter (mm) Pilot Diameter (mm) Shaft Diameter (mm) Shaft Length (mm) Key Width (mm) Motor Mount Code
70 50 16 40 5 GGA
75 60 16 48 5 GHA
85 70 22 56 6 GIA
90 60 19 40 6 JKF
90 70 16 40 5 JKG
90 70 19 40 6 JKA
100 80 14 40 5 JMC
100 80 16 40 5 IMB
100 80 19 40 6 IMC
100 80 19 55 6 JMD
100 80 20 40 6 GMB
100 80 22 48 6 GMA
115 95 19 40 6 INA
115 95 19 55 6 JNC
115 95 22 45 8 JND
115 95 22 70 NA JNB
115 95 24 45 8 JNA
115 95 24 50 8 INB
130 95 19 40 6 IPC
130 95 24 50 8 IPD
130 110 19 40 6 IPA
130 110 24 50 8 IPB
145 110 19 40 6 JQJ
145 110 19 55 5 JQG
145 110 19 55 6 JQK
145 110 22 55 8 JQH
145 110 22 55 6 JQF
145 110 22 70 8 JQE
145 110 24 55 8 JQD
MM =机械选件

L1 = One N.O., PNP
L2 = Two N.C., PNP
L3 = One N.O. PNP & two N.C., PNP
L4 = One N.O., NPN
L5 = Two N.C., NPN
L6 = One N.O., NPN & two N.C., NPN

For extended temperature operation consult factory for model number.

Login

Please log in or register to see the models and drawings.

Register

If you do not have a login, please proceed to the registration page

Register

If you currently have an Exlar website account and would like to delete it, please contact

CHA_Info@curtiss-wright.com

Privacy Notice

By giving us your contact information, you are giving consent to Curtiss-Wright / Exlar Automation to store your data and follow-up with you via email or phone.

At Curtiss-Wright, we promise to treat your data with respect and only share it with our representatives and distributors for the purpose outlined on the form. You can remove your request or information at any time by reaching out to our team at cha_info@curtisswright.com.

For further information on how we protect your information, please refer to our Privacy Notice.


Stay up to date

Get the latest Exlar product updates delivered directly to your inbox

You can change your mind at any time by clicking the unsubscribe link in the footer of any email you receive from us, or by contacting us at cha_info@curtisswright.com



 Security code
 How we use this information