FTX系列

FTX系列

高力电动执行器

  • 现在可与ASSIGN™一起使用
  • 液压缸更换
  • 长冲程长度
  • 高速和长寿命
Find a Distributor

液压缸更换

液压缸提供长寿命和高力小的封装尺寸。该系列FTX力高电动执行器是专门设计,让从传统的液压驱动电动迁移。基于行星滚柱丝杠技术,提供FTX生活和力密度与基于更常见的滚珠丝杠电动执行机构无法达到。凭借高达15倍的寿命和2X力密度,基于FTX滚柱丝杠是液压迁移到电力驱动时的正确选择

 

坚固可靠

液压缸通常安装在恶劣的工业设置。因此,所有FTX系列型号环境密封等级为IP65。另外,它的行星辊式丝杠机构承受显著更高冲击载荷弱于滚珠丝杠的替代品。迁移到电有信心知道FTX系列是每一位坚固,可靠,因为它们是设计来取代液压。

 

最低的维护

越来越多的机器制造商正在寻找消除液压油泄漏有关的混乱和停机时间。电力驱动,不仅消除了液体泄漏相关的问题,它提供了显著更高水平的性能和灵活性,可能比甚至与伺服液压解决方案。FTX系列滚柱丝杠驱动器让机器制造商满足其客户不断增长的性能需求,同时最大限度地减少或消除与传统的液压解决方案相关的维护问题。

 

快速的数据

楷模: FTX095, FTX125, FTX160, FTX215
外形尺寸: 95 mm (3.74 in), 125 mm (5 in), 160 mm (6.3 in) 215 mm (8.5 in)
螺丝信息: 5, 6, 10, 12, 20, 30 毫米 (.20, .25, .39, .50, .79, 1.18 英寸)
行程长度: 150, 300, 600, 900 毫米 (6, 12, 24, 36 英寸 )
线速度: 高达 1500 毫米/秒 (59 英寸/秒)
最大力量: 高达 178 千牛 (40,000 磅力)
标准/评分: IP65S

相关产业

配置选项

FTX系列配置选项

AAA = FTX Frame Size
BBBB = Stroke Length
CC = Screw Lead
D = Lubrication Type
E = Rod End Thread
FFF = Motor Mounting Configurations
GG = Motor Flange Code
HH = Motor Shaft Code
III = Motor Shaft Length

= Mounting Options
N = Other Options

机械选项

可调式外部行程开关

外部行程开关指示到控制器的行程,并且可以在原始位置或最终位置进行调节。

前安装法兰

前安装法兰,包括用于面安装的通孔

后U形夹,公制

后U形夹安装座,允许执行器在运动中旋转

后眼挂环

后眼安装座,允许执行器在运动中旋转

后耳轴支架

后耳轴是用作安装点或枢轴点的圆柱形突起。

润滑选项

润滑脂

FTX 系列执行器从工厂运出,用高温油脂完全润滑。 Exlar 使用美孚 SHC 220,一种高性能、极压的润滑脂。

低温油脂

对于低温应用,FTX 系列使用美孚 28。 这种润滑脂适用于环境温度范围从 -40°C 到 85°C 的执行器应用。

FTX 系列使用美孚 SHC 626 进行油料灌装。 执行器在运输时无需任何油,并且仅从工厂接收轻油涂层进行初步测试。

*某些选项不适用于每个配置。 对于以上未列出的选项或特殊功能或扩展温度操作, Exlar Applications Engineering.

Exlar执行器的IP等级

FTX系列

FTX095
性能规格
 Printable View

FTX095 Specifications

    5 10 20
Screw Lead mm 5 10 20
  in 0.197 0.394 0.787
Maximum Force* kN 22.2 22.2 22.2
  lbf 5,000 5,000 5,000
Life at Maximum Force km 392 626 1440
  in x 10^6 15.4 24.6 56.7
C_a (Dynamic Load Rating) kN 95.2 88.3 92.5
  lbf 21,400 19,850 20,800
Maximum Input Torque Nm 22.1 44.3 88.5
  lbf-in 196 392 783
Max Rated RPM @ Input Shaft RPM 4,500 4,500 4,500
Maximum Linear Speed @ Maximum Rated RPM mm/sec 373 750 1,500
  in/sec 14.7 29.5 59.3
Friction Torque Nm 1.12 1.12 1.12
  lbf-in 10 10 10

Intermediate and custom stroke lengths are also available. Belt and pulley inertia varies with ratio and motor selection. Please contact your local sales representative. 
* Maximum allowable actuator-generated force that can be applied routinely. Exceeding this force may result in permanent damage to the actuator. For high force, short stroke applications, consult factory.

 

FTX095 Inertias

BASE UNIT INERTIA ZERO STROKE [KG-M^2 (LBF-IN-SEC^2)] ADD PER 25 MM [KG-M^2 (LBF-IN-SEC^2)]  
—5 mm Lead 8.27 x 10^-4 (7.32 x 10^-3) 2.19 x 10^-6 (1.94 x 10^-5)  
—10 mm Lead 8.33 x 10^-4 (7.37 x 10^-3) 2.42 x 10^-6 (2.14 x 10^-5)  
—20 mm Lead 8.57 x 10^-4 (7.58 x 10^-3) 3.31 x 10^-6 (2.93 x 10^-5)  
       
Inline Drive Inertia Inline Unit - w/Motor Coupling Inline Unit - w/Motor Coupling For Gearbox Mount Add per 25 mm
—5 mm Lead 9.27 x 10^-4 (8.20 x 10^-3) 1.09 x 10^-3 (9.62 x 10^-3) 2.19 x 10^-6 (1.94 x 10^-5)
—10 mm Lead 9.33 x 10^-4 (8.26 X 10^-3) 1.09 x 10^-3 (9.67 x 10^-3) 2.42 x 10^-6 (2.14 x 10^-5)
—20 mm Lead 9.57 x 10^-4 (8.47 x 10^-3) 1.12 x 10^-3 (9.89 x 10^-3) 3.31 x 10^-6 (2.93 x 10^-5)
       
Parallel Drive Inertia 1:1 Reduction 2:1 Reduction  
—5 mm Lead (zero stroke) 4.90 x 10^-3 (4.34 x 10^-2) 2.22 x 10^-3 (1.97 x 10^-2)  
——Add per 25 mm stroke 2.19 x 10^-6 (1.94 x 10^-5) 5.48 x 10^-7 (4.85 x 10^-6)  
—10 mm Lead (zero stroke) 4.91 x 10^-3 (4.34 x 10^-2) 2.23 x 10^-3 (1.97 x 10^-2)  
——Add per 25 mm stroke 2.42 x 10^-6 (2.14 x 10^-5) 6.04 x 10^-7 (5.34 x 10^-6)  
—20 mm Lead (zero stroke) 4.93 x 10^-3 (4.37 x 10^-2) 2.23 x 10^-3 (1.98 x 10^-2)  
——Add per 25 mm stroke 3.31 x 10^-6 (2.93 x 10^-5) 8.28 x 10^-7 (7.33 x 10^-6)  

 

FTX095 Weights

  KG LB
Base Actuator Weight (Zero Stroke) 10 21
Actuator Weight Adder (Per 25 mm of stroke) 0.39 0.87
Adder for Inline (excluding motor) 2.9 6.5
Adder for Parallel Drive (excluding motor) 13.1 28.9
Adder for Front Flange 1.9 4.2
Adder for Rear Clevis 5.3 11.7
Adder for Rear Eye 5.1 11.3
Adder for Rear Trunnion 1.9 4.3
估计寿命曲线
订购指南
 Printable View

要从Exlar订购产品,需要一个唯一的模型掩码(标识号)。 模型掩码是一个字符串,用于标识模型,大小和配置替代。

FTX-Order-(1).jpg

产品选型指南

为了方便您的订购过程,请在与您所在地区的销售代表联系之前,随时打印并填写本 Exlar应用工作表

AAA = FTX框架尺寸

095 = 95 mm (3.74 in)
125 = 125 mm (5 in)
160 = 160 mm (6.3 in)
215 = 215 mm (8.5 in)

BBBB =行程长度

0150 = 150 mm
0300 = 300 mm
0600 = 600 mm
0900 = 900 mm (FTX095, FTX125, FTX160)

CC =螺丝钉
FTX095 FTX125 FTX160 FTX215
05 = 5 mm 05 = 5 mm 06 = 6 mm 06 = 6 mm
10 = 10 mm 10 = 10 mm 12 = 12 mm 12 = 12 mm
20 = 20 mm   30 = 30 mm 30 = 30 mm
D =润滑类型

1 = Grease
2 = Oil
​3 = Low-Temp Grease

E =杆端螺纹

A = Male, metric thread
B = Female, metric thread

FFF =电机安装配置

NMT = None, base unit only
N10 = Inline, includes shaft coupling
P10 = Parallel, 1:1 belt reduction
P20 = Parallel, 2:1 belt reduction

Always discuss your motor selection with your local sales representative.

GG-HH-III =在这里访问我们的电机解码器!

None, base unit only = 00-00-000

Motor-Decoder-01.jpg

 

M =安装选项

N = None
1 = Front Mounting Flange
5 = Rear Clevis1
7 = Rear Eye1
9 = Rear Trunnion

1= Not available with inline or NMT motor mount, contact your local sales representative.

N =其他选项

N = None

FTX125
性能规格
 Printable View

FTX125 Specifications

    5 10
Screw Lead mm 5 10
  in 0.197 0.394
Maximum Force* kN 44.5 44.5
  lbf 10,000 10,000
Life at Maximum Force km 249.2 486.3
  in x 10^6 9.81 19.14
C_a (Dynamic Load Rating) kN 163.7 162.4
  lbf 36,800 36,500
Maximum Input Torque Nm 46.5 82.3
  lbf-in 412 728
Max Rated RPM @ Input Shaft
 
RPM 3,500 3,500
Maximum Linear Speed @ Maximum Rated RPM mm/sec 292 583
  in/sec 11.5 23
Friction Torque Nm 2.23 2.23
  lbf-in 20 20

Intermediate and custom stroke lengths are also available. Belt and pulley inertia varies with ratio and motor selection. Please contact your local sales representative. 
* Maximum allowable actuator-generated force that can be applied routinely. Exceeding this force may result in permanent damage to the actuator. For high force, short stroke applications, consult factory.

 

FTX125 Weights

  KG LB
Base Actuator Weight (Zero Stroke) 21 47
Actuator Weight Adder (Per 25 mm of stroke) 0.84 1.85
Adder for Inline (excluding motor) 6.8 15
Adder for Parallel Drive (excluding motor) 25.6 56.5
Adder for Front Flange 3.6 7.9
Adder for Rear Clevis 6.5 14.3
Adder for Rear Eye 6.3 13.8
Adder for Rear Trunnion 3.1 6.8

 

FTX125 Inertias

BASE UNIT INERTIA ZERO STROKE [KG-M^2 (LB-IN-S^2)] ADD PER 25 MM [KG-M^2 (LB-IN-S^2)]  
—5 mm Lead 2.55 x 10^-3 (2.26 x 10^-2) 4.62 x 10^-5 (4.09 x 10^-4)  
—10 mm Lead 2.56 x 1^0-3 (2.27 x 10^-2) 4.65 x 10^-5 (4.12 x 10^-4)  
       
Inline Drive Inertia <32 mm Motor Shaft Diameter >32 mm Motor Shaft Diameter Add per 25 mm
—5 mm Lead 2.81 x 10^-3 (2.49 x 10^-2) 3.35 x 10^-3 (2.97 x 10^-2) 4.62 x 10^-5 (4.09 x 10^-4)
—10 mm Lead 2.82 x 10^-3 (2.50 x 10^-2) 3.36 x 10^-3 (2.98 x 10^-2) 4.65 x 10^-5 (4.12 x 10^-4)
       
Parallel Drive Inertia 1:1 Reduction 2:1 Reduction  
—5 mm Lead (zero stroke) 9.43 x 10^-3 (8.34 x 10^-2) 4.66 x 10-3 (4.12 x 10-2)  
——Add per 25 mm stroke 4.62 x 10^-5 (4.09 x 10^-4) 1.15 x 10^-5 (1.02 x 10^-4)  
—10 mm Lead (zero stroke) 9.44 x 10^-3 (8.35 x 10^-2) 4.66 x 10^-3 (4.13 x 10^-2)  
——Add per 25 mm stroke 4.65 x 10^-5 (4.12 x 10^-4) 1.16 x 10^-5 (1.03 x 10^-4)  
估计寿命曲线
订购指南
 Printable View

要从Exlar订购产品,需要一个唯一的模型掩码(标识号)。 模型掩码是一个字符串,用于标识模型,大小和配置替代。

FTX-Order-(1).jpg

产品选型指南

为了方便您的订购过程,请在与您所在地区的销售代表联系之前,随时打印并填写本 Exlar应用工作表

AAA = FTX框架尺寸

095 = 95 mm (3.74 in)
125 = 125 mm (5 in)
160 = 160 mm (6.3 in)
215 = 215 mm (8.5 in)

BBBB =行程长度

0150 = 150 mm
0300 = 300 mm
0600 = 600 mm
0900 = 900 mm (FTX095, FTX125, FTX160)

CC =螺丝钉
FTX095 FTX125 FTX160 FTX215
05 = 5 mm 05 = 5 mm 06 = 6 mm 06 = 6 mm
10 = 10 mm 10 = 10 mm 12 = 12 mm 12 = 12 mm
20 = 20 mm   30 = 30 mm 30 = 30 mm
D =润滑类型

1 = Grease
2 = Oil
​3 = Low-Temp Grease

E =杆端螺纹

A = Male, metric thread
B = Female, metric thread

FFF =电机安装配置

NMT = None, base unit only
N10 = Inline, includes shaft coupling
P10 = Parallel, 1:1 belt reduction
P20 = Parallel, 2:1 belt reduction

Always discuss your motor selection with your local sales representative.

GG-HH-III =在这里访问我们的电机解码器!

None, base unit only = 00-00-000

Motor-Decoder-01.jpg

 

M =安装选项

N = None
1 = Front Mounting Flange
5 = Rear Clevis1
7 = Rear Eye1
9 = Rear Trunnion

1= Not available with inline or NMT motor mount, contact your local sales representative.

N =其他选项

N = None

FTX160
性能规格
 Printable View

FTX160 Specifications

    6 12 30
Screw Lead mm 6 12 30
  in 0.236 0.472 1.181
Maximum Force* kN 89 89 89
  lbf 20,000 20,000 20,000
Life at Maximum Force km 154.9 416.6 358.9
  in x 10^6 6.1 16.4 21.2
C_a (Dynamic Load Rating) kN 263.7 290.0 233.0
  lbf 59,275 65,200 52,400
Maximum Input Torque Nm 106 212 531
  lbf-in 940 1,880 4,699
Max Rated RPM @ Input Shaft
 
RPM 2,000 2,000 2,000
Maximum Linear Speed @ Maximum Rated RPM mm/sec 201 401 1,000
  in/sec 7.9 15.8 39.0
Friction Torque Nm 4.54 4.54 4.54
  lbf-in 40 40 40

* Maximum allowable actuator-generated force that can be applied routinely. Exceeding this force may result in permanent damage to the actuator. For high force, short stroke applications, consult factory.

FTX160 Weights

  KG LB
Base Actuator Weight (Zero Stroke) 49 108
Actuator Weight Adder (Per 25 mm of stroke) 1.62 3.6
Adder for Inline (excluding motor) 14.2 31.5
Adder for Parallel Drive (excluding motor) 53.1 117.8
Adder for Front Flange 7.4 16.4
Adder for Rear Clevis 21.2 48.8
Adder for Rear Eye 22.4 49.7
Adder for Rear Trunnion 10.9 24.2

FTX160 Inertias

BASE UNIT INERTIA ZERO STROKE [KG-M^2 (LBF-IN-SEC^2)] ADD PER 25 MM [KG-M^2 (LBF-IN-SEC^2)]  
6 mm Lead 1.35 x 10^-2 (1.19 x 10^-1) 2.57 x 10^-4 (2.27 x 10^-3)  
12 mm Lead 1.35 x 10^-2 (1.20 x 10^-1) 2.58 x 10^-4 (2.28 x 10^-3)  
30 mm Lead 1.38 x 10^-2 (1.22 x 10^-1) 2.66 x 10^-4 (2.36 x 10^-3)  
Inline Drive Inertia <32 mm Motor Shaft Diameter >32 mm Motor Shaft Diameter Add per 25 mm
6 mm Lead 1.47 x 10^-2 (1.30 x 10^-1) 1.67 x 10^-2 (1.48 x 10^-1) 2.57x 10^-4 (2.27 x 10^-3)
12 mm Lead 1.47 x 10^-2 (1.30 x 10^-1) 1.68 x 10^-2 (1.49 x 10^-1) 2.58 x 10^-4 (2.28 x 10^-3)
30 mm Lead 1.50 x 10^-2 (1.33 x 10^-1) 1.71 x 10^-2 (1.51 x 10^-1) 2.66 x 10^-4 (2.36 x 10^-3)
Parallel Drive Inertia 1:1 Reduction 2:1 Reduction  
—6 mm Lead (zero stroke) 5.27 x 10^-2 (4.67 x 10^-1) 2.30 x 10^-2 (2.04 x 10^-1)  
——Add per 25 mm stroke 2.57 x 10^-4 (2.27 x 10^-3) 6.42 x 10^-5 (5.68 x 10^-4)  
—12 mm Lead (zero stroke) 5.28 x 10^-2 (4.67 x 10^-1) 2.30 x 10^-2 (2.04 x 10^-1)  
——Add per 25 mm stroke 2.58 x 10^-4 (2.28 x 10^-3) 6.45 x 10^-5 (5.71 x 10^-4)  
—30 mm Lead (zero stroke) 5.30 x 10^-2 (4.69 x 10^-1) 2.31 x 10^-2 (2.05 x 10^-1)  
——Add per 25 mm stroke 2.66 x 10^-4 (2.36 x 10^-3) 6.66 x 10^-5 (5.89 x 10^-4)  
估计寿命曲线
订购指南
 Printable View

要从Exlar订购产品,需要一个唯一的模型掩码(标识号)。 模型掩码是一个字符串,用于标识模型,大小和配置替代。

FTX-Order-(1).jpg

产品选型指南

为了方便您的订购过程,请在与您所在地区的销售代表联系之前,随时打印并填写本 Exlar应用工作表

AAA = FTX框架尺寸

095 = 95 mm (3.74 in)
125 = 125 mm (5 in)
160 = 160 mm (6.3 in)
215 = 215 mm (8.5 in)

BBBB =行程长度

0150 = 150 mm
0300 = 300 mm
0600 = 600 mm
0900 = 900 mm (FTX095, FTX125, FTX160)

CC =螺丝钉
FTX095 FTX125 FTX160 FTX215
05 = 5 mm 05 = 5 mm 06 = 6 mm 06 = 6 mm
10 = 10 mm 10 = 10 mm 12 = 12 mm 12 = 12 mm
20 = 20 mm   30 = 30 mm 30 = 30 mm
D =润滑类型

1 = Grease
2 = Oil
​3 = Low-Temp Grease

E =杆端螺纹

A = Male, metric thread
B = Female, metric thread

FFF =电机安装配置

NMT = None, base unit only
N10 = Inline, includes shaft coupling
P10 = Parallel, 1:1 belt reduction
P20 = Parallel, 2:1 belt reduction

Always discuss your motor selection with your local sales representative.

GG-HH-III =在这里访问我们的电机解码器!

None, base unit only = 00-00-000

Motor-Decoder-01.jpg

 

M =安装选项

N = None
1 = Front Mounting Flange
5 = Rear Clevis1
7 = Rear Eye1
9 = Rear Trunnion

1= Not available with inline or NMT motor mount, contact your local sales representative.

N =其他选项

N = None

FTX215
性能规格
 Printable View

FTX215 Specifications

    6 12 30
Screw Lead mm 6 12 30
  in 0.236 0.472 1.181
Maximum Force* kN 177.9 177.9 177.9
  lbf 40,000 40,000 40,000
Life at Maximum Force km 78.7 161.8 414.3
  in x 10^6 3.1 6.4 16.3
C_a (Dynamic Load Rating) kN 398 423 376
  lbf 89,500 95,200 84,700
Maximum Input Torque Nm 243 425 976
  lbf-in 2,148 3,760 8,642
Max Rated RPM @ Input Shaft
 
RPM 1,750 1,750 1,750
Maximum Linear Speed @ Maximum Rated RPM mm/sec 175 351 875
  in/sec 6.9 13.8 34.4
Friction Torque Nm 5.65 5.65 5.65
  lbf-in 50 50 50

*Maximum allowable actuator-generated force that can be applied routinely. Exceeding this force may result in permanent damage to the actuator. For high force, short stroke applications, consult factory.

FTX215 Weights

  KG LB
Base Actuator Weight (Zero Stroke) 103 227
Actuator Weight Adder (Per 25 mm of stroke) 2.70 5.96
Adder for Inline (excluding motor) 38.6 85.1
Adder for Parallel Drive (excluding motor) 62.3 137.3
Adder for Front Flange 26.7 58.8
Adder for Rear Clevis 32.5 71.6
Adder for Rear Eye 32.5 71.6
Adder for Rear Trunnion 9.6 212

 

FTX215 Inertias

BASE UNIT INERTIA
  6 mm Lead Add per 25 mm, 6 mm Lead
Base Unit - Input Drive Shaft Only 4.25 x 10^2 (3.76 x 10^1) 8.00 x 10^4 (7.08 x 10^3)
  12 mm Lead Add per 25 mm, 12 mm Lead
Base Unit - Input Drive Shaft Only 4.26 x 10^2 (3.77 x 10^1) 8.02 x 10^4 (7.10 x 10^3)
  30 mm Lead Add per 25 mm, 30 mm Lead
Base Unit - Input Drive Shaft Only 4.31 x 10^2 (3.82 x 10^1) 8.15 x 10^4 (7.21 x 10^3)
     
Inline Drive Inertia 6 mm Lead Add per 25 mm, 6 mm Lead
Inline Unit - w/Motor Coupling 4.43 x 10^2 (3.92 x 10^1) 8.00 x 10^4 (7.08 x 10^3)
Inline Unit - w/Motor Coupling >55mm Shaft Diameter 6.15 x 10^2 (5.44 x 10^1) 8.00 x 10^4 (7.08 x 10^3)
  12 mm Lead Add per 25 mm, 12 mm Lead
Inline Unit - w/Motor Coupling 4.44 x 10^2 (3.93 x 10^1) 8.02 x 10^4 (7.10 x 10^3)
Inline Unit - w/Motor Coupling >55mm Shaft Diameter 6.16 x 10^2 (5.45 x 10^1) 8.02 x 10^4 (7.10 x 10^3)
  30 mm Lead Add per 25 mm, 30 mm Lead
Inline Unit - w/Motor Coupling 4.49 x 10^2 (3.98 x 10^1) 8.15 x 10^4 (7.21 x 10^3)
Inline Unit - w/Motor Coupling >55mm Shaft Diameter 6.21 x 10^2 (5.50 x 10^1) 8.15 x 10^4 (7.21 x 10^3)
     
Parallel Drive Inertia 6 mm Lead Add per 25 mm, 6 mm Lead
1:1 Reduction Parallel Belt Drive 8.73 x 10^2 (7.72 x 10^1) 8.00 x 10^4 (7.08 x 10^3)
2:1 Reduction Parallel Belt Drive 3.14 x 10^2 (2.78 x 10^1) 2.00 x 10^4 (1.77 x 10^3)
  12 mm Lead Add per 25 mm, 12 mm Lead
1:1 Reduction Parallel Belt Drive 8.74 x 10^2 (7.73 x 10^1) 8.02 x 10^4 (7.10 x 10^3)
2:1 Reduction Parallel Belt Drive 3.14 x 10^2 (2.78 x 10^1) 2.01 x 10^4 (1.78 x 10^3)
  30 mm Lead Add per 25 mm, 30 mm Lead
1:1 Reduction Parallel Belt Drive 8.79 x 10^2 (7.78 x 10^1) 8.15 x 10^4 (7.21 x 10^3)
估计寿命曲线
订购指南
 Printable View

要从Exlar订购产品,需要一个唯一的模型掩码(标识号)。 模型掩码是一个字符串,用于标识模型,大小和配置替代。

FTX-Order-(1).jpg

产品选型指南

为了方便您的订购过程,请在与您所在地区的销售代表联系之前,随时打印并填写本 Exlar应用工作表

AAA = FTX框架尺寸

095 = 95 mm (3.74 in)
125 = 125 mm (5 in)
160 = 160 mm (6.3 in)
215 = 215 mm (8.5 in)

BBBB =行程长度

0150 = 150 mm
0300 = 300 mm
0600 = 600 mm
0900 = 900 mm (FTX095, FTX125, FTX160)

CC =螺丝钉
FTX095 FTX125 FTX160 FTX215
05 = 5 mm 05 = 5 mm 06 = 6 mm 06 = 6 mm
10 = 10 mm 10 = 10 mm 12 = 12 mm 12 = 12 mm
20 = 20 mm   30 = 30 mm 30 = 30 mm
D =润滑类型

1 = Grease
2 = Oil
​3 = Low-Temp Grease

E =杆端螺纹

A = Male, metric thread
B = Female, metric thread

FFF =电机安装配置

NMT = None, base unit only
N10 = Inline, includes shaft coupling
P10 = Parallel, 1:1 belt reduction
P20 = Parallel, 2:1 belt reduction

Always discuss your motor selection with your local sales representative.

GG-HH-III =在这里访问我们的电机解码器!

None, base unit only = 00-00-000

Motor-Decoder-01.jpg

 

M =安装选项

N = None
1 = Front Mounting Flange
5 = Rear Clevis1
7 = Rear Eye1
9 = Rear Trunnion

1= Not available with inline or NMT motor mount, contact your local sales representative.

N =其他选项

N = None

Resources

See All Resource Material for the Tritex II and other products in our Resource Library

Login

Please log in or register to see the models and drawings.

Register

If you do not have a login, please proceed to the registration page

Register

If you currently have an Exlar website account and would like to delete it, please contact

CHA_Info@curtiss-wright.com

Privacy Notice

By giving us your contact information, you are giving consent to Curtiss-Wright / Exlar Automation to store your data and follow-up with you via email or phone.

At Curtiss-Wright, we promise to treat your data with respect and only share it with our representatives and distributors for the purpose outlined on the form. You can remove your request or information at any time by reaching out to our team at cha_info@curtisswright.com.

For further information on how we protect your information, please refer to our Privacy Notice.


Stay up to date

Get the latest Exlar product updates delivered directly to your inbox

You can change your mind at any time by clicking the unsubscribe link in the footer of any email you receive from us, or by contacting us at cha_info@curtisswright.com



 Security code
 How we use this information