FTX215 Specifications

    6 12 30
Screw Lead mm 6 12 30
  in 0.236 0.472 1.181
Maximum Force* kN 177.9 177.9 177.9
  lbf 40,000 40,000 40,000
Life at Maximum Force km 78.7 161.8 414.3
  in x 10^6 3.1 6.4 16.3
C_a (Dynamic Load Rating) kN 398 423 376
  lbf 89,500 95,200 84,700
Maximum Input Torque Nm 243 425 976
  lbf-in 2,148 3,760 8,642
Max Rated RPM @ Input Shaft
 
RPM 1,750 1,750 1,750
Maximum Linear Speed @ Maximum Rated RPM mm/sec 175 351 875
  in/sec 6.9 13.8 34.4
Friction Torque Nm 5.65 5.65 5.65
  lbf-in 50 50 50

*Maximum allowable actuator-generated force that can be applied routinely. Exceeding this force may result in permanent damage to the actuator. For high force, short stroke applications, consult factory.

 

FTX215 Weights

  kg lb
Base Actuator Weight (Zero Stroke) 103 227
Actuator Weight Adder (Per 25 mm of stroke) 2.70 5.96
Adder for Inline (excluding motor) 38.6 85.1
Adder for Parallel Drive (excluding motor) 62.3 137.3
Adder for Front Flange 26.7 58.8
Adder for Rear Clevis 32.5 71.6
Adder for Rear Eye 32.5 71.6
Adder for Rear Trunnion 9.6 212

 

FTX215 Inertias

Base Unit Inertia Zero Stroke [kg-m^2 (lbf-in-sec^2)] Add per 25 mm [kg-m^2 (lbf-in-sec^2)]
  6 mm Lead Add per 25 mm, 6 mm Lead
Base Unit - Input Drive Shaft Only 4.25 x 10^2 (3.76 x 10^1) 8.00 x 10^4 (7.08 x 10^3)
  12 mm Lead Add per 25 mm, 12 mm Lead
Base Unit - Input Drive Shaft Only 4.26 x 10^2 (3.77 x 10^1) 8.02 x 10^4 (7.10 x 10^3)
  30 mm Lead Add per 25 mm, 30 mm Lead
Base Unit - Input Drive Shaft Only 4.31 x 10^2 (3.82 x 10^1) 8.15 x 10^4 (7.21 x 10^3)
     
Inline Drive Inertia 6 mm Lead Add per 25 mm, 6 mm Lead
Inline Unit - w/Motor Coupling 4.43 x 10^2 (3.92 x 10^1) 8.00 x 10^4 (7.08 x 10^3)
Inline Unit - w/Motor Coupling >55mm Shaft Diameter 6.15 x 10^2 (5.44 x 10^1) 8.00 x 10^4 (7.08 x 10^3)
  12 mm Lead Add per 25 mm, 12 mm Lead
Inline Unit - w/Motor Coupling 4.44 x 10^2 (3.93 x 10^1) 8.02 x 10^4 (7.10 x 10^3)
Inline Unit - w/Motor Coupling >55mm Shaft Diameter 6.16 x 10^2 (5.45 x 10^1) 8.02 x 10^4 (7.10 x 10^3)
  30 mm Lead Add per 25 mm, 30 mm Lead
Inline Unit - w/Motor Coupling 4.49 x 10^2 (3.98 x 10^1) 8.15 x 10^4 (7.21 x 10^3)
Inline Unit - w/Motor Coupling >55mm Shaft Diameter 6.21 x 10^2 (5.50 x 10^1) 8.15 x 10^4 (7.21 x 10^3)
     
Parallel Drive Inertia 6 mm Lead Add per 25 mm, 6 mm Lead
1:1 Reduction Parallel Belt Drive 8.73 x 10^2 (7.72 x 10^1) 8.00 x 10^4 (7.08 x 10^3)
2:1 Reduction Parallel Belt Drive 3.14 x 10^2 (2.78 x 10^1) 2.00 x 10^4 (1.77 x 10^3)
  12 mm Lead Add per 25 mm, 12 mm Lead
1:1 Reduction Parallel Belt Drive 8.74 x 10^2 (7.73 x 10^1) 8.02 x 10^4 (7.10 x 10^3)
2:1 Reduction Parallel Belt Drive 3.14 x 10^2 (2.78 x 10^1) 2.01 x 10^4 (1.78 x 10^3)
  30 mm Lead Add per 25 mm, 30 mm Lead
1:1 Reduction Parallel Belt Drive 8.79 x 10^2 (7.78 x 10^1) 8.15 x 10^4 (7.21 x 10^3)