FTX160 Specifications

    6 12 30
Screw Lead mm 6 12 30
  in 0.236 0.472 1.181
Maximum Force* kN 89 89 89
  lbf 20,000 20,000 20,000
Life at Maximum Force km 154.9 416.6 358.9
  in x 10^6 6.1 16.4 21.2
C_a (Dynamic Load Rating) kN 263.7 290.0 233.0
  lbf 59,275 65,200 52,400
Maximum Input Torque Nm 106 212 531
  lbf-in 940 1,880 4,699
Max Rated RPM @ Input Shaft
 		 RPM 2,000 2,000 2,000
Maximum Linear Speed @ Maximum Rated RPM mm/sec 201 401 1,000
  in/sec 7.9 15.8 39.0
Friction Torque Nm 4.54 4.54 4.54
  lbf-in 40 40 40

* Maximum allowable actuator-generated force that can be applied routinely. Exceeding this force may result in permanent damage to the actuator. For high force, short stroke applications, consult factory.

 

FTX160 Weights

  kg LB
Base Actuator Weight (Zero Stroke) 49 108
Actuator Weight Adder (Per 25 mm of stroke) 1.62 3.6
Adder for Inline (excluding motor) 14.2 31.5
Adder for Parallel Drive (excluding motor) 53.1 117.8
Adder for Front Flange 7.4 16.4
Adder for Rear Clevis 21.2 48.8
Adder for Rear Eye 22.4 49.7
Adder for Rear Trunnion 10.9 24.2

 

FTX160 Inertias

Base Unit Inertia Zero Stroke [kg-m^2 (lbf-in-sec^2)] Add per 25 mm [kg-m^2 (lbf-in-sec^2)]  
6 mm Lead 1.35 x 10^-2 (1.19 x 10^-1) 2.57 x 10^-4 (2.27 x 10^-3)  
12 mm Lead 1.35 x 10^-2 (1.20 x 10^-1) 2.58 x 10^-4 (2.28 x 10^-3)  
30 mm Lead 1.38 x 10^-2 (1.22 x 10^-1) 2.66 x 10^-4 (2.36 x 10^-3)  
Inline Drive Inertia <32 mm Motor Shaft Diameter >32 mm Motor Shaft Diameter Add per 25 mm
6 mm Lead 1.47 x 10^-2 (1.30 x 10^-1) 1.67 x 10^-2 (1.48 x 10^-1) 2.57x 10^-4 (2.27 x 10^-3)
12 mm Lead 1.47 x 10^-2 (1.30 x 10^-1) 1.68 x 10^-2 (1.49 x 10^-1) 2.58 x 10^-4 (2.28 x 10^-3)
30 mm Lead 1.50 x 10^-2 (1.33 x 10^-1) 1.71 x 10^-2 (1.51 x 10^-1) 2.66 x 10^-4 (2.36 x 10^-3)
Parallel Drive Inertia 1:1 Reduction 2:1 Reduction  
—6 mm Lead (zero stroke) 5.27 x 10^-2 (4.67 x 10^-1) 2.30 x 10^-2 (2.04 x 10^-1)  
——Add per 25 mm stroke 2.57 x 10^-4 (2.27 x 10^-3) 6.42 x 10^-5 (5.68 x 10^-4)  
—12 mm Lead (zero stroke) 5.28 x 10^-2 (4.67 x 10^-1) 2.30 x 10^-2 (2.04 x 10^-1)  
——Add per 25 mm stroke 2.58 x 10^-4 (2.28 x 10^-3) 6.45 x 10^-5 (5.71 x 10^-4)  
—30 mm Lead (zero stroke) 5.30 x 10^-2 (4.69 x 10^-1) 2.31 x 10^-2 (2.05 x 10^-1)  
——Add per 25 mm stroke 2.66 x 10^-4 (2.36 x 10^-3) 6.66 x 10^-5 (5.89 x 10^-4)