FTX095 Specifications

    5 10 20
Screw Lead mm 5 10 20
  in 0.197 0.394 0.787
Maximum Force* kN 22.2 22.2 22.2
  lbf 5,000 5,000 5,000
Life at Maximum Force km 392 626 1440
  in x 10^6 15.4 24.6 56.7
C_a (Dynamic Load Rating) kN 95.2 88.3 92.5
  lbf 21,400 19,850 20,800
Maximum Input Torque Nm 22.1 44.3 88.5
  lbf-in 196 392 783
Max Rated RPM @ Input Shaft RPM 4,500 4,500 4,500
Maximum Linear Speed @ Maximum Rated RPM mm/sec 373 750 1,500
  in/sec 14.7 29.5 59.3
Friction Torque Nm 1.12 1.12 1.12
  lbf-in 10 10 10

Intermediate and custom stroke lengths are also available. Belt and pulley inertia varies with ratio and motor selection. Please contact your local sales representative. 
* Maximum allowable actuator-generated force that can be applied routinely. Exceeding this force may result in permanent damage to the actuator. For high force, short stroke applications, consult factory.

 

FTX095 Inertias

Base Unit Inertia Zero Stroke [kg-m^2 (lbf-in-sec^2)] Add per 25 mm [kg-m^2 (lbf-in-sec^2)]  
—5 mm Lead 8.27 x 10^-4 (7.32 x 10^-3) 2.19 x 10^-6 (1.94 x 10^-5)  
—10 mm Lead 8.33 x 10^-4 (7.37 x 10^-3) 2.42 x 10^-6 (2.14 x 10^-5)  
—20 mm Lead 8.57 x 10^-4 (7.58 x 10^-3) 3.31 x 10^-6 (2.93 x 10^-5)  
       
Inline Drive Inertia Inline Unit - w/Motor Coupling Inline Unit - w/Motor Coupling For Gearbox Mount Add per 25 mm
—5 mm Lead 9.27 x 10^-4 (8.20 x 10^-3) 1.09 x 10^-3 (9.62 x 10^-3) 2.19 x 10^-6 (1.94 x 10^-5)
—10 mm Lead 9.33 x 10^-4 (8.26 X 10^-3) 1.09 x 10^-3 (9.67 x 10^-3) 2.42 x 10^-6 (2.14 x 10^-5)
—20 mm Lead 9.57 x 10^-4 (8.47 x 10^-3) 1.12 x 10^-3 (9.89 x 10^-3) 3.31 x 10^-6 (2.93 x 10^-5)
       
Parallel Drive Inertia 1:1 Reduction 2:1 Reduction  
—5 mm Lead (zero stroke) 4.90 x 10^-3 (4.34 x 10^-2) 2.22 x 10^-3 (1.97 x 10^-2)  
——Add per 25 mm stroke 2.19 x 10^-6 (1.94 x 10^-5) 5.48 x 10^-7 (4.85 x 10^-6)  
—10 mm Lead (zero stroke) 4.91 x 10^-3 (4.34 x 10^-2) 2.23 x 10^-3 (1.97 x 10^-2)  
——Add per 25 mm stroke 2.42 x 10^-6 (2.14 x 10^-5) 6.04 x 10^-7 (5.34 x 10^-6)  
—20 mm Lead (zero stroke) 4.93 x 10^-3 (4.37 x 10^-2) 2.23 x 10^-3 (1.98 x 10^-2)  
——Add per 25 mm stroke 3.31 x 10^-6 (2.93 x 10^-5) 8.28 x 10^-7 (7.33 x 10^-6)  

 

FTX095 Weights

  kg lb
Base Actuator Weight (Zero Stroke) 10 21
Actuator Weight Adder (Per 25 mm of stroke) 0.39 0.87
Adder for Inline (excluding motor) 2.9 6.5
Adder for Parallel Drive (excluding motor) 13.1 28.9
Adder for Front Flange 1.9 4.2
Adder for Rear Clevis 5.3 11.7
Adder for Rear Eye 5.1 11.3
Adder for Rear Trunnion 1.9 4.3