GTX100 Mechanical Specifications

  Stroke Length mm (in) Screw Lead mm (in) Continuous Force Rating N (lbf) Max Velocity mm/s (in/s) Dynamic Load Rating N (lbf) Armature Inertia kg-m^2 (in-lb-s^2)
      4 (VAC) 4 (VAC)    
GTX100-150-01 150 (5.9) 2.54 (0.1) 15,392 (3,460) 191 (7.5) 54,557 (12,266) 0.0014085 (0.012467)
GTX100-150-02   5.08 (0.2) 12,098 (2,720) 381 (15.0) >55,972 (12,584)
GTX100-150-05   12.7 (0.5) 5,444 (1,224) 953 (37.5) 37,141 (8,350)
GTX100-300-01 300 (11.8) 2.54 (0.1) 15,392 (3,460) 191 (7.5) 54,557 (12,266) 0.0017399 (0.015399)
GTX100-300-02   5.08 (0.2) 12,098 (2,720) 381 (15.0) 55,972 (12,584)
GTX100-300-05   12.7 (0.5) 5,444 (1,224) 953 (37.5) 37,141 (8,350)
Maximum velocities listed at maximum voltages
Do not exceed 2X the continuous force rating during operation

Configured stroke lengths available. Consult Exlar sales representative. 

Continuous force rating based upon 25° C ambient conditions

 

Motor Voltage   4 (AC)

Specifications subject to change without notice.
Test data derived using NEMA recommended aluminum heatsink 12" x 12" x 1/2" at 25°C ambient.
VAC Class winding operational compatible with drive voltages up to 460 VAC

* For actuators with a 0.1” lead, the torque and current must be limited to 8.89 nm/9.0 a not to exceed the continuous force rating specified in the mechanical specifications table on page 6. Peak torque and current values would be 2x the continuous values

Max Bus Voltage V 460 Vrms
Speed @ Bus Voltage RPM 4500
RMS Sinusoidal Commutation
Continuous Motor Torque Nm 12.23
  lbf-in 108.2
Continuous Current Rating* A 12.3
Peak Current Rating* A 24.7
Torque Constant (Kt) (+/– 10% @ 25˚C) Nm/A 1.11
  lbf-in/A 9.8
Voltage Constant (Ke)
(+/– 10% @ 25˚C)
V/kRPM 67
0 - Peak Sinusoidal Commutation
Continuous Motor Torque Nm 12.23
  lbf-in 108.2
Continuous Current Rating A 17.4
Peak Current Rating A 34.8
Torque Constant (Kt)
(+/– 10% @ 25˚C)
Nm/A 0.78
  lbf-in/A 6.92
Voltage Constant (Ke) (+/– 10% @ 25˚C) V/kRPM 94.8
Pole Configuration Number of Poles 8
Resistance (L-L) (+/– 5% @ 25˚C) Ohms 0.65
Inductance (L-L)(+/– 15%) mH 4.9
Electrical Time Constant ms 7.6
Insulation Class 460 VAC Max, 180°C (Class H)

 

GTX100 Weights  
Description kg (lb)
GTX100-150 13.1 (28.8)
GTX100-300 16.0 (35.2)
Brake Adder 1.2 (2.7)
Front Flange (1) 2.2 (4.7)
Tapped Face (3) 1.1 (2.4)
Rear Clevis (5) 0.8 (1.8)
Imperial Flange (F) 1.9 (4.1)
Imperial Clevis (C) 1.1 (2.5)
Anti Rotate (150 mm stroke) 1.5 (3.2)
Anti Rotate (300 mm stroke) 2.0 (4.5)
Limit Switch Assembly w/Anti-Rotate (150 mm stroke) 2.0 (4.5)
Limit Switch Assembly w/Anti-Rotate (300 mm stroke) 2.8 (6.2)